Carburettors & Parts

A huge range of parts including carburettor kits, carb linkages, spare carburettor parts, fuel pumps, fuel lines and filters and air-filters and stacks.

EMPI Progressive 32/36 Carb Kit

EMPI EPC 32/36 Progressive Carburettor Kit. Very popular conversion for stock and mildly tuned engines. Fits Type 1 or Type 2.

Improves power and gives a good mpg. Fits twin ports or single ports with a casting provided. Includes carburettor with electronic choke, centre manifold, air-filter and linkage. Pre '66 Bugs MUST use engine lid stand-offs.

129 706 22

Weber Progressive 32/36 Carb Kit

Weber 32/36 Progressive Carburettor Kit. Very popular conversion for stock and mildly tuned engines. Fits Type 1 or Type 2.

129 410

Weber Twin 34 ICT Carb Kit

Weber Twin 34 ICT Carb Kit - The performance of twin carbs, but with reasonable fuel economy. Kit includes 2 carbs, manifolds and air-filters together with a top quality hex-bar linkage with thick steel mounts, air-craft quality heim joints, coil re-location bracket, all fixings and gaskets.

Available for Single-Port or Twin-Port Engines and for a variety of models - please specify when ordering.

129 1401

EMPI Twin 34 EPC Carb Kit

EMPI Twin 34 EPC Carb Kit - The performance of twin carbs, but with reasonable fuel economy. Kit includes 2 carbs, manifolds and air-filters together with a top quality hex-bar linkage with thick steel mounts, air-craft quality heim joints, coil re-location bracket, all fixings and gaskets.

Available for Single-Port or Twin-Port engines and for a variety of models - please specify when ordering.

129 7401

SCAT Twin Solex Carb Kit

SCAT Twin Solex carb kit. Includes carbs, manifolds, air-filters, centre swivel linkage, fittings and gaskets. Twin-port engines only. Fits Beetles or Vans. MUST be used with a 30hp style fan-shroud!

Available with 35mm carbs (with electric chokes) or 40mm carbs (NO electric chokes) - specify carb size when ordering.

129 30435

EMPI Kadron Twin Carb Kit

EMPI Kadron Twin carb kit. Now uses either brosol or solex carbs with used to be supplied with the Kadron kits. Excellent kit for power, but not so great on the fuel - these tend to be a bit thirsty! Kit supplied with carbs, manifolds, air-filtes, linkage, fittings and gaskets.

Suitable for Twin-port engines only, and fit Beetle or Van. Available with 40mm or 44mm carbs and with a choice of no chokes or electric chokes - please specify when ordering.

129 434 400

EMPI IDF / HPMX 40mm Twin Carb Kit

EMPI IDF / HPMX Twin Carb Kit. 40mm size carbs. EMPI now produce their own version of the famous Weber IDF Carb - looks the same, but with improvements to the design. The is the best kit for street and strip use. Individual cylinder adjustments allow for precise tuning and great power.

Fits Twin-port engines in Beetle or Vans. The kit includes carbs, manifolds, air-filters, hex bar linkage, fittings and gaskets.

129 7317

EMPI IDF / HPMX 44mm Twin Carb Kit

EMPI IDF / HPMX Twin Carb Kit. 44mm size carbs. EMPI now produce their own version of the famous Weber IDF Carb - looks the same, but with improvements to the design. The is the best kit for street and strip use. Individual cylinder adjustments allow for precise tuning and great power.

Fits Twin-port engines in Beetle or Vans. The kit includes carbs, manifolds, air-filters, hex bar linkage, fittings and gaskets.

129 7319

Single Port Conversion Castings

Single Port manifold conversion end castings all you to fit twin-port manifolds to single-port engines! Some engines will require the castings to be filed before fittings - this is normal and the castings are NOT faulty! Supplied as a pair with boots and clips.

129 3237

Twin Port End Castings

Twin port manifold end castings. Supplied as a pair with end boots. Suitable for all twin-port engines.

129 360

Manifold Boots

Urethane manifold boots. Supplied as a pair.

129 902

Performance PICT Manifold

Performance PICT Manifold - can be used on any stock carb. Uses the twin-port manifold ends or the single-port conversion ends. Gives a better air-flow and hence a small increase in HP.

129 244

Weber 32/36 Manifold

Weber 32/36 Manifold Kit. Complete with pre-heat pipes, support brackets and hardware. Suitable for Beetles or Vans.

129 3232

Weber 34 ICT Manifolds

Weber 34 ICT Manifold Kits. Supplied as a pair with studs, nuts and gaskets required. Available for Single-port or Twin-port engines and for a variety of models - please specify when ordering.

129 435 205

EMPI / Kadron Manifolds

EMPI / Kadron manifold kit. Supplied as a pair with studs, nuts and gaskets. For twin-port engines only. Fits Beetle or Van.

129 434 412

Weber IDA Manifolds

Weber IDA Manifolds. Supplied in pairs with studs, nuts and gaskets. Available for standard 48 IDAs or for Racing 48 IDAs (these have more metal to allow for your own larger porting requirements) - specify when ordering.

129 435 215

Weber IDF / EMPI HPMX / Dellorto DRLA Manifolds

Manifold Kit supplied in pairs with nuts, studs and gaskets. For Beetle or Bus (some clearance issues on some models)

Normal offset for IDF / DRLA / EMPI HPMX Carbs

129 1039

SCAT IDF / DRLA Manifolds

SCAT 'Mini-D' Manifold Kit supplied in pairs with nuts, studs and gaskets. For Beetle or Bus (some clearance issues on some models). This kit is the SCAT Mini-D for the 'D' port heads.

129 350

SCAT IDF / DRLA Manifolds

SCAT Manifold Kit for 'wedge' cylinder heads, supplied in pairs with nuts, studs and gaskets. For Beetle or Bus (some clearance issues on some models). This is the SCAT kit for 'Wedge' port heads.

129 361

IDF / Eliminator Manifolds

IDF / Eliminator Manifold Kit supplied in pairs with nuts, studs and gaskets. For Beetle or Bus (some clearance issues on some models). This kit is for the IDF / Eliminator heads.

129 220

Twin-Port Cylinder Head Gaskets

Pair of fibre twin-port cylinder head inlet gaskets.

129 3251

Weber 32/36 Carb Linkage

Weber 32/36 carb linkage kit. Provides additional return spring and easy cable connection for the Weber 32/36 conversions. Also useful if the accelerator cable tube outlet in the fanshroud is too low.

129 430 602

EMPI / Kadron Linkage

New cross bar linkage kit. Swing-bar type linkage kit with return spring. For EMPI / Kadron carbs on Beetles or Vans.

129 434 410

Weber IDA Linkage

Weber IDA linkage kit. Chrome round bar (not hex shaped). Can be used with air-filters.

129 435 241

EMPI Hexbar Linkage

EMPI Hexbar linkage kit. The same linkage we supply in our EMPI carb kits. Heavy gauge stee mounting plates with nylon bushings, aluminium hex-bar, diecast aluminium arms with twin bolt clamps (not grub screws that come loose), aircraft style heim joints and coil relocation brackets. Available for a variety of carbs - specify when ordering.

129 435 220

SCAT Central Swivel Linkage

SCAT Central swivel linkage kit. Universal fitment will mount to any Beetle or Van engine (won't work with fanshrouds that have air-outlets). Use with most carbs: Weber, EMPI, Kadron. Aluminium linkage rods with forged right and left hand thread heim joints for precise adjustment.

129 30050

CSP Bell Crank Linkage

CSP Bell Crank Linkage kit. Stainless steel CNC machined linkage. Left and right hand threaded pull rods for easy adjustment. Fits Weber or EMPI HPMX carbs. Available for use with normal fanshrouds or with Porsche Fanshrouds - specify when ordering.

129 942

Carburettor Re-Build Kits

Carburettor re-build kits contain all the fibre gaskets, diaphragms and seals needed to re-build your carb. Prices are PER carburettor (ie, for twin carbs, buy two!). Specify carb type when ordering.

198 9939

EMPI Kadron Float

Replacement EMPI Kadron float for 40mm carbs (without choke). Supplied individually.

129434 405

EMPI Kadron Throttle Body

Replacement throttle body for EMPI Kadron carb 40mm (without choke).

129 434 403

Weber Choke Unit

Replacement 12v choke unit for the Weber 32/36 carbs.

129 430 620

IDF Blanking Plate

IDF / HPMX cold start blanking plate.

129 435 709